1/1

SFH series
Feeding Hoppers

The feeding hopper is designed for the initial stage of the crushing-screening line, used to load medium-sized feed material. It allows loading with a wheel loader or excavator and ensures a steady supply of material to the next stage. Operating at lower pressure and wear rates compared to primary hoppers, it provides reliable capacity for consistent production flow.

*** Hoppers are stone loading containers which keep and feed the product with a slow and constant speed to the next part of the crushing-screening line.

*** Lower part of the hopper is narrowed and equipped with a small vibrating feeder, which controls the feeding speed of the product.

*** Speed control of the vibrating feeder can be adjusted from control panel, which regulates rotation speed of the vibromotor.

*** Depending on installation place, hoppers can be used at primary or secondary stages.

*** When hopper is used as primary, it is intalled on a ground concrete with a standart height, so that loader or excavator can load.

*** When it is used as secondary, hoppers are installed above crusher, so that primary output conveyor feeds the hopper, and from hopper feeder directly to the crusher inlet.

--- TECHNICAL DETAILS TABLE ---

A	B	C	D	E
MODEL	LOADING VOLUME	MOTOR POWER	HOPPER DIMENSIONS	TOTAL WEIGHT
SFH 10	10 m3	2 x 1.5 kW	2.4 x 3 x 1.2 m	4000 kg
SFH 20	20 m3	2 x 1.5 kW	3 x 4 x 1.5 m	5900 kg
SFH 30	30 m3	2 x 2 kW	3 x 4 x 2.5 m	7500 kg